Surface Treatment
Our Products
Rubber-ceramic wear liners
- Designed for wear protection of conveyor chutes
- Popular especially among steelmakers and engineering firms
(also supplied for in-house installation by users)
| Vulcanization (adhesion to a base material) |
10*10*3 mm thick–25*25*10 mm thick
[Rubber]
3–10 mm thick, natural rubber
* Consult with us about liner sheet sizes and ceramics specifications.
Ceramic wear liners
- Designed for wear protection of hoppers and chutes
- Popular especially among steelmakers and engineering firms
| Vulcanization (adhesion to a base material) |
10*10*3 mm thick–100*100*30 mm thick
[Rubber]
3–10 mm thick, natural rubber
[Base plate]
4.5, 6, or 9 mm thick (SS400, accompanied by countersunk bolts)
* Consult with us about liner sheet sizes and ceramics specifications.
Ceramic pipes (reinforced chip)
- Wear protection of pipes from transported materials
- Popular especially among steelmakers, power utilities, and engineering firms
| Adhesive joining |
10*10*3 mm thick or greater
* Consult with us about pipe sizes and ceramics specifications.
Ceramic pipes (reinforced sleeve)
- Wear protection of pipes from transported materials
- Popular especially among steelmakers, power utilities, and engineering firms
| Adhesive joining |
About 5–10 mm thick
Nominal diameter: up to 400 mm
* Consult with us about pipe sizes and ceramics specifications.
Butterfly valves
- Designed for wear protection of pipes from transported materials
- Popular especially among steelmakers and engineering firms
| Adhesive joining/Vulcanization |
Nominal diameter: 125–450 mm
* Consult with us about ceramics specifications.
Ball valves
- Designed for wear protection of pipes from transported materials
- Popular especially among steelmakers and engineering firms
| Adhesive joining |
5*10*1.5 mm thick–10*10*3 mm thick
Nominal diameter: up to 25 mm
* Consult with us about pipe sizes and ceramics specifications.
Check valves
- Designed for wear protection of pipes from transported materials
- Popular especially among steelmakers and engineering firms
| Adhesive joining |
10*10*1.5 mm thick–10*10*5 mm thick
* Consult with us about ceramics specifications.
Screw feeders
- Designed for wear protection of screws from transported materials
- Popular especially among manufacturers of steel, cement, and castings, as well as power utilities
| Adhesive joining |
10*10*4 mm thick or greater
L 10*15* *10*4 mm thick or greater
* Optionally, the internal surface of the screw casing can also be protected against wear.
* Consult with us about ceramics specifications.
Unloader
- Wear protection of the internal surface of bucket elevator casing
- Popular especially among steelmakers
| Adhesive joining |
6-mm thick rubber-ceramic wear liners are applied.
* Consult with us about ceramics specifications.
Buckets for handling raw materials
- Wear protection of the inner surface of buckets
- Popular especially among steelmakers
| Adhesive joining |
10*10*3 mm thick–20*20*5 mm thick
* Consult with us about ceramics specifications.
Drum feeders
- Protection against wear and sticking caused by sinter charges
- Popular especially among steelmakers and plant construction companies
| Adhesive joining |
20*20*10 mm thick
[Application]
Apply rubber-ceramic wear liners to the main unit of a drum feeder.
* Consult with us about ceramics specifications.
Sinter bed
- Wear protection of sinter beds to prevent the leakage rate from falling
- Popular especially among steelmakers
| Adhesive joining |
φ 20*15 mm long, φ 10*10 mm long
* Round bars of ceramics are embedded.
Ducts for wind legs
- Wear protection of dampers and the inner surface of ducts, and prevention of air leakage to enhance sealing performance
- Popular especially among steelmakers
| Welding |
100*100*15 mm thick
* Consult with us about ceramics specifications.
Dampers for wind legs
- Wear protection of dampers and the inner surface of ducts, and prevention of air leakage to enhance sealing performance
- Popular especially among steelmakers
| Welding |
100*100*15 mm thick
* Consult with us about ceramics specifications.
Expansion pipes for wind legs
- Wear protection of dampers and the inner surface of ducts, and prevention of air leakage to enhance sealing performance
- Popular especially among steelmakers
| Welding |
100*100*15 mm thick
* Consult with us about ceramics specifications.
Charging chutes (entry)
- Protection of charging chutes against wear and sticking
- Popular especially among steelmakers
| Welding |
100*100*10 mm thick
* Consult with us about ceramics specifications.
Vertical cylindrical vibrating screens
- Wear protection of exhaust chutes
- Popular especially among steelmakers
| Adhesive joining |
6-mm thick rubber-ceramic wear liners are applied.
* Consult with us about ceramics specifications.
Grizzly screens
- Wear protection of grizzly bars
- Popular especially among steelmakers
| Vulcanization/Adhesive joining |
20 mm thick
[Rubber]
5 mm thick, natural rubber
* Consult with us about the specifications.
Multi-cyclone dust collectors for cool dry quenching
- Wear protection of the internal surface of the external sleeve and conical portion
- Popular especially among steelmakers
| Mortar joining |
About 6 mm thick
* Consult with us about ceramics specifications.
Liners for blast furnace tops
- Extension of service life of furnace top equipment
- Popular especially among steelmakers
| Vulcanization |
20 mm thick
[Rubber]
8 mm thick, natural rubber
[Base plate]
12 mm thick (SS400, accompanied by countersunk bolts)
* Consult with us about liner specifications.
Ceramic pipes for PCI
- Employed for pulverized coal injection
- Popular especially among steelmakers
| Mortar joining |
About 10 mm thick
* Consult with us about ceramics specifications.
Distributors and pads for water granulation
- Wear protection of water granulation equipment
- Popular especially among steelmakers
| Adhesive joining |
10–20 mm thick
* Consult with us about ceramics specifications.
Blowers for dust collectors
- Wear protection and energy saving with blower impellers
- Popular especially among manufacturers of steel and cement, as well as power utilities
| Adhesive joining |
Impeller inlet: U-shaped ceramics
Impeller corner: C-shaped ceramics
Impeller surface: 10*10*3 mm thick or greater
* Upon request, main units of blowers can be newly produced or repaired.
Heat-resistant blowers
- Wear protection and energy saving with blowers that operate in an intermediate or high temperature range
- Popular especially among manufacturers of steel and cement, as well as power utilities
| Adhesive joining |
Impeller inlet: U-shaped ceramics
Impeller surface: 30*30*7.5 mm thick with pins
30*30*10 mm thick with capped screws
* Upon request, main units of blowers can be newly produced or repaired.
Cleaner chips
- Attached to belt cleaners
- Popular especially among steelmakers
| Adhesive joining |
10*50*5 mm thick
* Consult with us about ceramics specifications.
Basalt pipes (reinforced sleeve)
- Wear protection of pipes from transported materials
- Popular especially among steelmakers, power utilities, and engineering firms
| Mortar joining |
About 25–30 mm thick
Nominal diameter: up to 600 mm
* Consult with us about pipe sizes, basalt thickness, and other specifications.
Bell mouth pipes
- Wear protection of pipes from transported materials
- Popular especially among steelmakers, power utilities, and engineering firms
| Mortar joining/Fastened with ceramic nuts |
About 30 mm thick, flat plate
* Consult with us about basalt thickness and other specifications.
Modular wear liners (for feed bin hoppers)
- Wear protection of hoppers and chutes
- Popular especially among steelmakers, power utilities, and engineering firms
| Mortar joining |
About 25–30 mm thick
About 30 mm thick, flat plate
* Consult with us about basalt thickness and other specifications.
Block wear liners for scale sluices
- Wear protection of sluices
- Popular especially among steelmakers and engineering firms
| Mortar joining |
About 30 mm thick, flat plate, R plate
* Consult with us about basalt thickness and other specifications.
Conveyor casings
- Wear protection of casings
- Popular especially among steelmakers, power utilities, and engineering firms
| Mortar joining |
About 30 mm thick, flat plate
* Consult with us about basalt thickness and other specifications.
Liners for the intermediate housing of mill bodies
- Wear protection of mill body casings from the coal pulverization and agitation process
- Popular especially among power utilities
| Welding |
100*100*15 mm thick or greater
* Consult with us about ceramics specifications.
Flow dampers
- Wear protection of flow dampers from transported pulverized coal
- Popular especially among power utilities
| Adhesive joining |
20*20*4 mm thick or greater
* Consult with us about ceramics specifications.
Liners for the intermediate housing of mill bodies
- Wear protection of mill body casings from the coal pulverization and agitation process
- Popular especially among power utilities
| Welding |
100*100*15 mm thick or greater
* Consult with us about ceramics specifications.
Flow dampers
- Wear protection of flow dampers from transported pulverized coal
- Popular especially among power utilities
| Adhesive joining |
20*20*4 mm thick or greater
* Consult with us about ceramics specifications.
Cyclone incinerators
- Wear protection of ash processing equipment
- Popular especially among power utilities
| Adhesive joining |
25*50*10 mm thick, 100*100*10 mm thick
* Consult with us about ceramics specifications.
